Toyota Corolla

1992-1998 of release

Repair and car operation

Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
- 11. Body
   11.1. Maintenance and repair
   11.2. Vinyl furnish
   11.3. Upholstery and rugs
   11.4. Repair of insignificant damages of a body
   11.5. Repair of considerable damages of a body
   11.6. Loops and locks
   11.7. Windscreen and motionless glasses
   11.8. Cowl
   11.9. Trunk lid
   11.10. A back door (models with a body "Versatile person")
   11.11. Basic rack of a back door
   11.12. Decorative panel of a door
   11.13. Door
   11.14. Door latch, lock and handle cylinder
   11.15. Door windowpane
   11.16. Bumpers
   11.17. External mirror
   11.18. Seats
   11.19. Frame of a combination of devices
   11.20. Glove compartment
   11.21. Central decorative panel
   11.22. Casing of a steering column
   11.23. Bottom panel of furnish of a steering column
   11.24. Console
   11.25. Dashboard
   11.26. Front grille
   11.27. Ventilating lattice of a cowl
   11.28. Seat belts
+ 12. Electric equipment

лечение спины

11.13. Door

Removal

PERFORMANCE ORDER

1. Remove the decorative panel of a door (see subsection 11.12). Disconnect any electric connections and push them through an opening at doors that they did not prevent removal.
	2. Place a jack or goats under a door or ask the assistant to support a door when you will unscrew bolts.
Prevention If the jack or goats are used, place rags between them and a door to protect the painted surface of a door.
	3. Unscrew a strut bolt (it is specified by an arrow) limiter of opening of a door.
	4. Before easing or unscrewing of bolts (are specified by shooters) put marks round them, having marked their location.
5. Unscrew bolts of fastening of a loop to a door and carefully remove a door. Installation is made in return sequence.

Adjustment

In an installation time be convinced that the door is located correctly. If it is necessary, adjust it as it is described below:

PERFORMANCE ORDER

	1. Vertical and longitudinal adjustment is carried out by weakening of bolts of fastening of loops to a body and door moving as it is necessary. The special bent adaptation can be necessary for you to get to some bolts.
	2. Vertical adjustment and adjustment of depth of landing of a door are carried out by weakening of bolts of fastening of lateral loops of a door and door moving as it is necessary. The special bent adaptation can be necessary for you to get to some bolts.
	3. The latch of the door lock can be adjusted on a vertical and across to provide reliable gearing with the locking mechanism. It can be made, having weakened fixing bolts (are specified by shooters) and moving a latch as it is necessary.