Toyota Corolla

1992-1998 of release

Repair and car operation



Toyota Corolla
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and details
   2.3. Check of level of liquids
   2.4. Check of a condition of tires and pressure in tires
   + 2.5. Servicing through each 5000 km or 3 months
   - 2.6. Servicing through each 12000 km or 6 months
      2.6.1. Check and replacement of brushes of a cleaner of a windscreen
      2.6.2. Check and adjustment of a free wheeling of a pedal of coupling
      2.6.3. Check of a condition and charging of the storage battery
      2.6.4. Drive belt
      2.6.5. Check of a condition of hoses in a motor compartment
      2.6.6. Check of system of cooling
      2.6.7. Shift of wheels
   + 2.7. Servicing through each 24000 km or 12 months
   + 2.8. Servicing through each 50000 km or 2 years
   + 2.9. Servicing through each 100000 km or 4 years
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment


.


2.6. Servicing through each 12000 km or 6 months

2.6.1. Check and replacement of brushes of a cleaner of a windscreen

PERFORMANCE ORDER
1. It is necessary to check periodically a condition of a cleaner and windscreen brushes, existence of the damages, weakened connections, and also cracks and wear of a working part of brushes.
2. In use on working parts of brushes dirt and dust deposits therefore efficiency of purification of glasses decreases collect. Therefore brushes should be washed out regularly weak solution of detergent.
3. At operation of the mechanism of a screen wiper there is a weakening of carving connections (bolts, nuts, fixing brackets). Therefore the mechanism of a screen wiper needs periodic check and pulling up of the specified connections. At the same time it is expedient to check a condition of brushes.
4. At detection on scraper parts of brushes of cracks, wear tracks and deformations or if brushes cease to clear glass, it is necessary to replace them new.
5. Remove shchetkoderzhatel assembled with brushes from levers for what press a latch, then pull together a shchetkoderzhatel from the lever, having inclined on the bent site.
6. Get a working element of a brush, having extended it on the right side of a framework of a shchetkoderzhatel.
7. Insert a new brush on the right side of a framework of a shchetkoderzhatel so that small combs on a brush came into a bracket of a shchetkoderzhatel. Stretch a brush before complete installation in a framework then fix a brush, having pressed combs under a framework bracket.