Toyota Corolla

1992-1998 of release

Repair and car operation



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
- 5. Fuel, exhaust systems
   5.1. Specifications
   5.2. Order of performance of a decompression of fuel system
   5.3. Fuel pump and pressure of fuel
   5.4. Removal and installation of the fuel pump
   5.5. Fuel level sensor
   5.6. Gasoline pipe lines and joints
   5.7. Fuel tank
   5.8. Cleaning and repair of a fuel tank
   5.9. Air filter
   5.10. Cable of a drive of a butterfly valve
   5.11. System of electronic injection of fuel (EFI - system)
   5.12. Check and replacement of EFI units - systems
   5.13. Service of an exhaust system
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment


5.10. Cable of a drive of a butterfly valve

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Release lock-nuts of a tip of a cable on the butterfly valve case.
3. Turn the lever of a butterfly valve and get a cable, having passed it through a groove in the lever.
4. Disconnect a cable (it is specified by an arrow) from a pedal. Unscrew two bolts of fastening of an arm of a cover of a cable to a partition of a motor compartment.
5. Working from within salon, stretch a cable through a partition of a motor compartment.

Installation and adjustment

PERFORMANCE ORDER
1. The cable is established upside-down. Be convinced of correctness of installation of a through sealant of a cover of a cable in a partition of a motor compartment.
2. For adjustment of a cable press to the full a pedal, thus the butterfly valve should be completely open. If the zaslonka did not open completely, release lock-nuts, press a pedal to the full and at completely open zaslonka tighten lock-nuts.
3. Check adjustment. At a pedal otpuskaniye the zaslonka should be closed completely.