Toyota Corolla

1992-1998 of release

Repair and car operation



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
- 5. Fuel, exhaust systems
   5.1. Specifications
   5.2. Order of performance of a decompression of fuel system
   5.3. Fuel pump and pressure of fuel
   5.4. Removal and installation of the fuel pump
   5.5. Fuel level sensor
   5.6. Gasoline pipe lines and joints
   5.7. Fuel tank
   5.8. Cleaning and repair of a fuel tank
   5.9. Air filter
   5.10. Cable of a drive of a butterfly valve
   5.11. System of electronic injection of fuel (EFI - system)
   5.12. Check and replacement of EFI units - systems
   5.13. Service of an exhaust system
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment


5.6. Gasoline pipe lines and joints

GENERAL INFORMATION

Sometime there will come time and you should check a condition of an exhaust system or to change some details (for example, suspension brackets of exhaust pipes) for what it is required to lift the car. At performance of any works under the car always check a condition of the gasoline pipe lines, all joints and connections.

Check

PERFORMANCE ORDER
1. Check existence on hoses and tubes of cracks, breaks, deformations.
2. Be convinced of reliability of fastening of gasoline pipe lines to the body bottom, check a condition of fixing brackets.
3. Check tightness of connections of hoses with unions of metal tubes, a condition of collars of hoses.

Replacement

PERFORMANCE ORDER
1. New details of the fuel highway should be made from this a material, as replaced details. It is forbidden to establish hoses and tubes from the materials, not corresponding recommended, or not calculated on fuel influence. Otherwise leakage of fuel and creation of a fire-dangerous situation is possible.
2. Always before dismantling of the fuel highway, or a detachment of any detail, mark a relative positioning of tubes (1) and hoses (2), remember initial installation of collars (3) and шплинтов that at assembly in accuracy to restore an initial arrangement of these details. Observe the scheme and an order of fastening of hoses on unions of metal tubes.
3. Before dismantling of a gasoline pipe line execute actions for a decompression of the highway of fuel system, unscrew a stopper of a jellied mouth of a tank and disconnect the battery from weight. Wrap up assorted connection by rags for absorption of spilled gasoline.