Toyota Corolla

1992-1998 of release

Repair and car operation

Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
- 9. Brake system
   9.1. Specifications
   9.2. System of anti-blocking of brakes (ABS)
   9.3. Brake shoes of forward brakes
   9.4. Support of forward brakes
   9.5. Brake shoes of back disk brakes
   9.6. Support of back disk brakes
   9.7. Brake disk
   9.8. Brake shoes of back drum-type brakes
   9.9. Working cylinder
   9.10. Main cylinder of brake system
   9.11. Brake hoses and tubes
   9.12. Hydraulic system of brakes
   9.13. Vacuum amplifier
   9.14. Hand brake
   9.15. Ropes of the hand brake
   9.16. Brake pedal
   9.17. Switch of headlights of a stoplight
   9.18. The valve of restriction of the pressure, sensitive to car loading
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment

9.14. Hand brake



The lever of the hand brake at the correct adjustment should rise by 4–7 clicks if to pull it with average force. If it rises by smaller number of clicks, there is a probability that the car does not act in film completely from the hand brake and brake shoes constantly concern brake disks or drums. If the lever can be lifted on bigger number of clicks, the hand brake can not hold the car on an inclination, and it can sweep.

1. For receiving access to the adjusting mechanism of a rope of the hand brake remove the central console (see subsection 11.24).
2. Turn off a lock-nut (the top nut), holding an adjusting nut (bottom) by means of a wrench. Turn an adjusting nut so that to receive the demanded size of a course of the lever of the hand brake. Tighten a lock-nut.
3. Establish the central console into place.