1. For filling by oil of differential of 3-speed automatic transmissions the separate opening closed by a stopper is provided, this opening is also intended for control of level of oil. For access to a stopper it is necessary to lift the car and to establish on a support, works under the car established only on a jack are forbidden. |
|
2. Unscrew a stopper of a control opening (1) in a forward part of a case of transmission (2 – a drain stopper). |
3. Having pushed in a finger, be convinced наощупь that level of oil is precisely at level of bottom edge of a control opening. If necessary add oil through a funnel or by means of a syringe (the recommended brand is specified in subsection 2.1). Oil to add until then while it will not start to follow through bottom edge of a control opening. |
4. Turn and reliably tighten a stopper. |