1992-1998 of release
Repair and car operation
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
- 3.1. Petrol engines
+ 3.1.1. Repair work without engine dismantle from the car
- 3.1.2. Dismantle and major maintenance
22.214.171.124. Engine diagnostics by means of a vakuumer
126.96.36.199. Compression check in engine cylinders
+ 188.8.131.52. Dismantle of the power unit - methods and safety measures
184.108.40.206. Alternatives of major maintenance of the engine
220.127.116.11. Order of dismantling of the engine
18.104.22.168. Head of the block of cylinders
22.214.171.124. Repair of valves
126.96.36.199. Shatunno-porshnevaya group
188.8.131.52. Crankshaft dismantle
184.108.40.206. Block of cylinders
220.127.116.11. Honningovaniye of cylinders
18.104.22.168. Cranked shaft
22.214.171.124. Radical and shatunny bearings
126.96.36.199. Engine assembly order
188.8.131.52. Piston rings
184.108.40.206. Installation of a cranked shaft and check of gaps of radical bearings
220.127.116.11. Back epiploon
18.104.22.168. Installation of shatunno-piston group
22.214.171.124. Engine start-up after repair and a running in
+ 3.2. Diesel engine
+ 3.3. Engine electric equipment
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment
At independent performance of major maintenance various options are possible. The decision on replacement of the block of cylinders, shatunno-piston group and a cranked shaft depends on a number of factors from which the most important is the condition of the block of cylinders. Other reasons are repair cost, possibility of access to the equipment of workshops of car-care center, existence of spare parts, time planned for work, and also personal experience.
Here some of options of performance of major maintenance.
Acquisition of separate spare parts
If check shows that the block of cylinders and the majority of details are in a satisfactory condition and can be used further, the most expedient from the economic point of view is purchase of separate spare parts. The block of cylinders, shatunno-piston group and a cranked shaft should be surveyed especially carefully. Even if insignificant wear of the block of cylinders is found, cylinders are subject to an obligatory honningovaniye.
Block of cylinders of an incomplete complete set
The block of cylinders of an incomplete complete set contains the block of cylinders with established by the krivoshipno-shatunny mechanism and piston group. All interfaced details are picked up for the dimensional groups, all gaps correspond to norms. On the block the cam-shaft, the klapanny mechanism, a head of the block of cylinders and hinged units are separately mounted not a part of it ремкомплекта. Costs of machining are minimum or are not required absolutely.
Repair engine (block of cylinders of a full complete set)
The repair engine delivered in the spare part contains all set of the block of cylinders of an incomplete complete set, and also the oil pump, the oil pallet, a head of the block of cylinders, a cover of a head of the block of cylinders, a cam-shaft, the klapanny mechanism, gear wheels of a drive of a cam-shaft, a gear belt and belt covers. All details are established with new bearings, consolidations and laying. On a set soaking-up and final collectors and hinged units are mounted only.
Carefully think over, what of alternatives to you best of all approaches, before purchase or before registration of the order for spare parts consult in a local workshop of car-care center, with suppliers of spare parts, and also with experts in restoration of engines.