Toyota Corolla

1992-1998 of release

Repair and car operation

Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
- 12. Electric equipment
   12.1. Safety locks
   12.2. Burned-through crossing points
   12.3. Automatic switches
   12.4. Relay
   12.5. Breakers of indexes of turns / alarm system
   12.6. The combined switch
   12.7. The switches established on a steering column
   12.8. Lock of ignition and lock drum
   12.9. Switch of a heater of back glass
   12.10. Heater of back glass
   12.11. Radio receiver and loudspeakers
   12.12. Aerial
   12.13. Bulbs of headlights of head light
   12.14. Headlights of head light
   12.15. Replacement of bulbs
   12.16. System of day inclusion of headlights
   12.17. Engine of screen wipers
   12.18. Instrument guard
   12.19. Sound signal
   12.20. System cruise control
   12.21. System of the central lock
   12.22. System of window regulators
   12.23. Rear-view mirrors with the electric drive
   12.24. Safety airbag
   + 12.25. Electroschemes

12.3. Automatic switches


As on some models automatic switches turn on back after switching off, in case of an overload in the chains, the switched-off switch for an instant will disconnect a chain, and then, will return it to a working condition. If the switch back does not turn on, immediately check an electric chain. Do not forget, however, that after operation it is necessary to return some automatic switches in an initial condition manually.

After elimination of a source of malfunction in chains, the automatic switch will normally work.

For return of the automatic switch to an initial condition disconnect a wire of the negative plug of the accumulator.

Remove the switch, insert a thin spoke or something similar into a small opening of the switch and press on it so that to hear click.
After the automatic switch will be switched on, it is recommended to check, how he carries out an electric current, having connected an ohmmeter to switch plugs, before its installation.


If the stereoplayer of your car has coding system, check, whether you know a code of activation of a player before an accumulator detachment.