Toyota Corolla

1992-1998 of release

Repair and car operation



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
- 12. Electric equipment
   12.1. Safety locks
   12.2. Burned-through crossing points
   12.3. Automatic switches
   12.4. Relay
   12.5. Breakers of indexes of turns / alarm system
   12.6. The combined switch
   12.7. The switches established on a steering column
   12.8. Lock of ignition and lock drum
   12.9. Switch of a heater of back glass
   12.10. Heater of back glass
   12.11. Radio receiver and loudspeakers
   12.12. Aerial
   12.13. Bulbs of headlights of head light
   12.14. Headlights of head light
   12.15. Replacement of bulbs
   12.16. System of day inclusion of headlights
   12.17. Engine of screen wipers
   12.18. Instrument guard
   12.19. Sound signal
   12.20. System cruise control
   12.21. System of the central lock
   12.22. System of window regulators
   12.23. Rear-view mirrors with the electric drive
   12.24. Safety airbag
   + 12.25. Electroschemes


12.9. Switch of a heater of back glass

GENERAL INFORMATION


Prevention

On these models the airbag of safety which can reveal is established (to be filled with air) when it is connected to the accumulator. Disconnect a wire of the negative plug of the accumulator and wait for at least two minutes before the work beginning with a safety airbag.

If the stereoplayer of your car has coding system, check, whether you know a code of activation of a player before an accumulator detachment.


Table of connection of a tester and conductivity of the switch of a heater of back glass

If conductivity between contacts of the socket of connection not such as it is specified in the table, replace the ignition lock.

Check and replacement

PERFORMANCE ORDER
1. Disconnect a wire of the negative plug of the accumulator.
2. Remove the central panel of furnish and overturn it for receiving access to the switch of a heater of back glass.
3. By means of an ohmmeter check conductivity of an electric current between the specified plugs when the switch is in various provisions.
4. Replace the switch, if conductivity between contacts of the socket of connection not such as it is specified in the table.