Repair and Toyota Corolla car operation - 1.5.40. An AM-VHF-radio tape recorder with electronic control//Toyota the Corolla of 1992-1998 /

Toyota Corolla

1992-1998 of release

Repair and car operation



Toyota Corolla
- 1. Maintenance instruction
   1.2. Codes of models
   1.3. Control panel
   + 1.4. Combination of devices
   - 1.5. Governing bodies and instrumentations
      1.5.1. Keys for the car
      1.5.2. Immobilizer system (recognition of a code of start-up of the engine)
      1.5.3. Locking of doors
      1.5.4. Electric equipment of doors
      1.5.5. Drive of glasses
      1.5.6. Trunk lid
      1.5.7. Back door
      1.5.8. Cowl
      1.5.9. Stopper of a jellied mouth of a fuel tank
      1.5.10. The hatch with the electric drive
      1.5.11. Adjustment of forward seats
      1.5.12. Addition of a back seat
      1.5.13. Head restraint
      1.5.14. Seat heater
      1.5.15. Safety cushions for the driver and the passenger
      1.5.16. Elements of system of additional damping at failure
      1.5.17. Adjustment of an inclination of a steering wheel
      1.5.18. Rear-view mirror
      1.5.19. Headlights and indexes of turns
      1.5.20. Adjustment of a beam of light of headlights
      1.5.21. Signal of an emergency stop and regulator of illumination of devices
      1.5.22. Back antifog lamps
      1.5.23. Lamps of internal lighting
      1.5.24. Inclusion of a cleaner and windscreen washer
      1.5.25. Inclusion of a cleaner and washer of back glass
      1.5.26. Heater of back glass
      1.5.27. Index of level of fuel
      1.5.28. The index of temperature of cooling liquid
      1.5.29. Voltmeter
      1.5.30. Tachometer
      1.5.31. Counter of the total passable way
      1.5.32. Light indexes and warning signals
      1.5.33. Lock of ignition and lock of a steering column
      1.5.34. 3-step automatic transmission
      1.5.35. 4-step automatic transmission
      1.5.36. Mechanical transmission
      1.5.37. System of blocking of interaxal differential
      1.5.38. Hand brake
      1.5.39. Radio receiver AM-UKV with electronic control
      1.5.40. An AM-VHF-radio tape recorder with electronic control
      1.5.41. Adjustment of the direction of a stream of air
      1.5.42. Hours
      1.5.43. Lighter and ashtray
      1.5.44. Perchatochny box
      1.5.45. The container for trifles
      1.5.46. A framework for luggage transportation (a body the Versatile person)
      1.5.47. Trunk lid
      1.5.48. Superimposed rug of a floor
      1.5.49. Period of a running in of the car
      1.5.50. Fuel
      1.5.51. Threefold catalytic converter
      1.5.52. Oil expenditure engine
      1.5.53. Brakes
      1.5.54. Ruled cargo placements in a luggage carrier
      1.5.55. Identification data of the car
   + 1.6. Start-up of the engine and driving
   1.7. Specifications
   1.8. Adjusting data, refueling capacities and liquids
   + 1.9. Possible malfunctions
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment



1.5.40. An AM-VHF-radio tape recorder with electronic control

GENERAL INFORMATION

Receiver

1. Button of turning on of the receiver and AM-or VHF reception choice
2. The button party for control with frequency fall
3. The button for control for station
4. The button party for control with frequency increase
5. Buttons of a choice of station
6. Button of adjustment of a timbre or balance
7. Button of a choice of adjustment of a timbre or balance
8. Display
9. The NF button of automatic search of RDS system on all range of a network broadcasting
10. Buttons for setup of the receiver and an IT mode choice (reception of road information)
11. Handle of adjustment of a sound

Cassette player

1. Button of inclusion of a player
2. The button party for rewind back
3. The button for cartridge rewind in both directions
4. Storna of the button for rewind forward
5. The button of the reducer Hollow
6. Button of adjustment of a timbre or balance

7. Button of a choice of adjustment of a timbre or balance
8. Display
9. The button of a choice of the party of the cartridge for reproduction
10. The button for a stop and cartridge removal
11. Handle of adjustment of a sound

Using receiver

PERFORMANCE ORDER
1. Turn on the receiver, having pressed the L.M.U button, choose a stereo mode - or monophonic reception or press the TI button for reception of station of a broadcasting of road information. On the display there will be symbols of L, M or U. The receiver can be included also in pressing the PWR.VOL handle.
2. Adjust loudness, turning the PWR.VOL handle.
3. Be adjusted on the necessary station. At control for VHF station the receiver will automatically be switched in a stereoreception mode. On the display there will be a ST symbol. If the signal weak, occurs automatic narrowing of a strip of reception for the purpose of decrease in noise. If the signal very weak, occurs automatic switching of the receiver on a monophonic mode of reception.
4. Adjust a timbre and balance.
5. To switch off the receiver, press the PWR.VOL handle.

Control for station

Be adjusted on the necessary station by means of one of offered below ways. On the display there will be a value of frequency of control.

PERFORMANCE ORDER
Control in a program mode
1. Apply a program mode to control for in advance programmed station.
2. Press several times the LMU button while on the display there will be no chosen information.
3. Press the button with number which was in advance appropriated to the necessary station. There is a control for the necessary station, and on the display there will be number of the button of the necessary station.
Mode of continuous search
4. Press at the same time on both parties of the TUNE SEEK button and wait a continuous sound signal. The receiver will start to carry out automatically search of the next station with higher or lower frequency of a broadcasting. After a consistent reception control stops. By each subsequent pressing of the button search will proceed to a consistent reception of the following station.
5. If because of too weak signal it is not possible to be adjusted after single scanning in all range of frequencies, search will proceed, but at hypersensibility, and on the display there will be a symbol of DX. After station reception control automatically stops.
Manual control
6. Press at the same time on both parties of the TUNE SEEK button for a while, not exceeding 0,5 pages. By each pressing of the button occurs перескок to frequency on which the broadcasting is possible.

 Control programming

PERFORMANCE ORDER
1. Press several times the LMU button while on the display there will be no designation of the chosen range by L, M or U. You can establish to six stations in each chosen range (on each pressed button). At installation of station check those ranges in which the necessary control already is.
2. Be adjusted on the necessary station.
3. Press one of buttons of a choice of station and wait a sound signal. Thus the station will automatically join by pressing this button, which number will appear on the display. To bring in memory control for new station, repeat the procedure described above. Control for the programmed station is erased at food shutdown (a detachment of the battery, a safety lock peregoraniya etc.).

Obtaining road information from RDS system (radio data)

PERFORMANCE ORDER
1. The receiver will automatically be switched in a mode of reception of the station broadcasting RDS information at switching on VHF range. When switching on the display there will be a name of the relevant radio station and a RDS symbol.
2. If to be adjusted on new by VHF station, broadcasting RDS information, on the display there will be a value of frequency, and through 5 with there will be a name of the relevant radio station.
Control by programming, automatic search and manually
3. The order of control is described above.
Control by scanning in all range
4. When on the display there is a symbol of TR (Traffic Program), it means that this station will broadcast road information and EON data.
5. The receiver is switched to TI range by TI button pressing. Thus on the display there will be a TI symbol. If later 20 c after TI button pressing the receiver does not find station, station search on the basis of the list of alternative frequencies (AF list) which comes to an end at station detection will begin. About transition of the receiver to such mode warns a sound signal and a SEARCH symbol on the display.
If to be adjusted on station after single scanning in all range it will not be possible because of a weak signal, scanning will repeat, but at hypersensibility to what the symbol of DX on the display will testify. If the signal too weak, the receiver stops search and on the display on 2 with there will be NOTHING. If during 20 more about the receiver it is not adjusted on TI range station, scanning will be made a fresh start. When on the display there will be TI, the receiver will accept TI station only if control is made by search in an automatic mode.
6. If obtaining road information, and station on which the receiver is adjusted is required, broadcasts other program, press the TI button and hold until on the display there will be no symbol THAT (Traffic Announcement). At emergence of this symbol the receiver ceases to accept all programs, except road or if transfer of road information at present being absent, and the cartridge is inserted into a player, the player which is automatically switched off at the moment of the beginning of a broadcasting of road information joins. After the completion of transfer or if the signal becomes weak, the previous program joins.
7. To come back from a mode of reception of road information to a usual mode, press the TI button and hold until from the display the symbol THAT will not disappear.
Control for a tracking mode on networks (IMF mode)
8. Control for a tracking mode on networks (IMF mode) is used for search of RDS station in all strip of frequencies. Press the NF button and hold more than 2 with, thus the receiver will be adjusted on RDS station, and the accepted program will not interrupt. On the display there will be a NF symbol. At deterioration of conditions of reception control for station which broadcasts the same program, will be made on the basis of the list of the alternative frequencies received from RDS station.
9. If the RDS station (with data of EON (Enhanced Other Network)) to which you listen, does not hand over road information in the TI modes and THAT, the receiver will automatically be switched to the program broadcasting road information on the basis of the list of alternative frequencies of EON. After the termination of an aвтоматически broadcast the previous program joins. At the beginning and after nepeключения sound signals are distributed.
10. For cancellation of a NF mode press the NF button and keep not less than 2 villages. When on the display there will be a REGON symbol, the receiver will be adjusted on such RDS station which has an identical code of identification of the program (PI-kod). When on the display there will be a REG OFF symbol, the receiver will be adjusted on such RDS station which has identical three-digit PI-kod.
11. If during 60 about the receiver will not find RDS station, there is a muffling of all programs and station search with identical PI-kodom on the basis of the list of alternative frequencies (AF list) begins. If because of a weak signal to find station it is not possible, search of all stations of VHF range again will begin. About transition of the receiver to such mode warns a sound signal and a SEARСН symbol on the display. It will not be possible if to be adjusted because of very weak signal, search stops and on the display on 2 with there will be a NOTHING symbol.
12. For NF mode cancellation press the NF button twice. The NF symbol will disappear from the display.

 Timbre adjustment

PERFORMANCE ORDER
1. For reproduction adjustment in the field of the bottom frequencies press several times the MODE button, until then while on the display there will be no O.Zatem's BASS press the level button from any party and establish the necessary timbre. The adjustment range from BASS-10 to BASS +10, level of a timbre is displayed on the display.
2. For reproduction adjustment in the field of the top frequencies press several times the MODE button, until then while on the display there will be no O.Zatem's TREB press the level button from any party and establish the necessary timbre. The adjustment range from TREB-10 to TREB +10, level of a timbre is displayed on the display.

Balance adjustment

PERFORMANCE ORDER
Two loudspeakers
1. Press several times the MODE button while on the display there will be no O.Zatem's BAL press the level button from any party and establish the necessary balance. The range of adjustment of balance for the left and right loudspeakers from BAL L14 to BAL R14, level of balance is displayed on the display.
Four loudspeakers
2. For balance control between the left and right loudspeaker press several times the MODE button while on the display there will be no O.Zatem's BAL press the level button from any party and establish the necessary balance. The range of adjustment of balance from BAL L14 to BAL +R14, level of balance is displayed on the display. For balance control between forward and back loudspeakers press several times the MODE button while on the display there will be no O.Zatem's FADE press the level button from any party and establish the necessary balance. The range of adjustment of balance of forward and back loudspeakers – from FADE F14 to FADE R14, level of balance is displayed on the display.