Toyota Corolla

1992-1998 of release

Repair and car operation

Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines
   + 3.2. Diesel engine
   - 3.3. Engine electric equipment
      3.3.1. Specifications
      3.3.2. Battery
      3.3.3. Power cables
      3.3.4. Ignition system
      3.3.5. Ignition coil
      3.3.6. Ignition distributor
      3.3.7. Check and installation of the moment of ignition
      3.3.8. Block of electronic ignition
      3.3.9. Induction sensor
      3.3.10. System of a charge of the battery
      3.3.11. Generator
      3.3.12. Generator details
      3.3.13. System of start-up of the engine
      3.3.14. Starter electric motor
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment

3.3.8. Block of electronic ignition

Replacement

BLOCK OF ELECTRONIC IGNITION OF EXTERNAL INSTALLATION

PERFORMANCE ORDER

1. Disconnect the battery from weight.

2. Disconnect the socket from the block of electronic ignition.

3. Unscrew screws of fastening of an arm (are specified by shooters), get the block of electronic ignition assembled with an arm from a motor compartment.

4. The block is established upside-down.

THE BLOCK OF ELECTRONIC IGNITION BUILT IN THE DISTRIBUTOR

PERFORMANCE ORDER

1. Disconnect the battery from weight.
2. Remove the ignition coil (see subsection 3.3.5).
3. Disconnect the socket from the block of electronic ignition.
	4. Unscrew fastening screws (are specified by shooters) ignition block, get the block with an arm from a motor compartment
4. The block is established upside-down.