Toyota Corolla

1992-1998 of release

Repair and car operation



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Systems of cooling, heating
   4.1. Specifications
   4.2. Antifreeze
   4.3. Thermostat
   4.4. Fan and relay of turning on of the fan
   4.5. Radiator and broad tank
   4.6. The pump of cooling liquid
   4.7. The sensor of temperature of cooling liquid
   4.8. Fan block
   4.9. Heater radiator
   + 4.10. Control panel heater and conditioner
   4.11. Vlagootodelitel of the conditioner
   4.12. Compressor
   4.13. Condenser
   4.14. Evaporator and broad valve
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment




4.11. Vlagootodelitel of the conditioner

Removal

PERFORMANCE ORDER
1. Depressurize the conditioner and remove a coolant in service of car-care center of Toyota or in a specialized workshop.
2. Remove a decorative lattice (see subsection 11.26).
3. Disconnect tubes of a supply of a coolant from a moisture separator and muffle tubes to prevent moisture hit. It is necessary to unscrew one screw and one bolt (are specified by shooters).
4. Unscrew a bolt and remove a receiver from an arm.

Installation

PERFORMANCE ORDER
1. The receiver is established upside-down.
2. Fill system with a coolant in the same workshop in which depressurization was carried out.