Toyota Corolla

1992-1998 of release

Repair and car operation



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
- 10. Suspension bracket and steering
   10.1. Specifications
   10.2. Rack of a suspension bracket (lobby)
   10.3. Suspension bracket rack
   10.4. Stabilizer of cross-section stability (a forward suspension bracket) and plug
   10.5. Suspension bracket lever
   10.6. Spherical hinges
   10.7. Rotary fist and nave
   10.8. Nave and nave bearing (a forward wheel)
   10.9. Stabilizer of cross-section stability (a back suspension bracket) and plug
   10.10. Rack of a suspension bracket (back)
   10.11. Longitudinal draft
   10.12. Cross-section drafts of a suspension bracket
   10.13. Nave and bearing (a back wheel)
   10.14. Arm of a nave of a back wheel
   10.15. Steering
   10.16. Steering wheel
   10.17. Tips of steering drafts
   10.18. Steering transfer
   10.19. Pump of system of strengthening of a steering
   10.20. System of strengthening of a steering
   10.21. Wheels and tires
   10.22. Adjustment of corners of installation of wheels
+ 11. Body
+ 12. Electric equipment


10.11. Longitudinal draft

Removal

PERFORMANCE ORDER
1. Turn off nuts of fastening of a wheel, lift the car and establish it on support. Remove a wheel.
2. Turn off and remove a fastening bolt (are specified by shooters) longitudinal bent for to a nave arm.
3. Turn off and remove a fastening bolt (are specified by shooters) longitudinal bent for to an arm of a body and remove longitudinal draft from the car.

Installation

PERFORMANCE ORDER
Installation is carried out upside-down removals. Do not tighten bolts while the suspension bracket will not be lifted by means of a jack in that situation in which it is when the car costs on wheels. Tighten nuts till the demanded moment of an inhaling specified in the section of technical characteristics at the beginning of this chapter. Tighten nuts of fastening of a wheel till an inhaling, specified in the section of technical characteristics in the corresponding chapter.