Toyota Corolla

1992-1998 of release

Repair and car operation



Toyota Corolla
- 1. Maintenance instruction
   1.2. Codes of models
   1.3. Control panel
   + 1.4. Combination of devices
   + 1.5. Governing bodies and instrumentations
   - 1.6. Start-up of the engine and driving
      1.6.1. Check before engine start-up
      1.6.2. Check after engine start-up
      1.6.3. Driving receptions
      + 1.6.4. Trailer towage
      1.6.5. Actions at refusal of start-up of the engine
      1.6.6. Obligatory set of tools and spare wheel
      1.6.7. Wheel replacement
      1.6.8. Car towage
      1.6.9. Motor compartment
      1.6.10. Arrangement of safety locks
      1.6.11. Check of level of oil in the engine
      1.6.12. Choice of brand of oil
      1.6.13. Check of level of cooling liquid
      1.6.14. Composition of cooling liquid
      1.6.15. Pressure check in tires
      1.6.16. Replacement of tires
      1.6.17. Shift of wheels
      1.6.18. Installation of winter tires and chains
      1.6.19. Precautionary measures for cast aluminum disks
      1.6.20. Check of an external condition of the battery
      1.6.21. Check of level of electrolit
      1.6.22. Battery charging
      1.6.23. Check and replacement of safety locks
      + 1.6.24. Replacement of lamps
   1.7. Specifications
   1.8. Adjusting data, refueling capacities and liquids
   + 1.9. Possible malfunctions
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment



1.6.11. Check of level of oil in the engine

GENERAL INFORMATION

 
1. To add
2. Normal level
3. Transfusion
L. Bottom mark
F. Top mark

Level of oil is checked on the heated-up engine.

PERFORMANCE ORDER
1. Establish the car on an equal platform. Stop the engine and wait some minutes that oil flew down in the pallet.
2. Get щуп and wipe.
3. Insert щуп against the stop.
4. Get щуп and by the provision of an oil film determine oil level
5. If level is below the bottom mark, unscrew a stopper and add oil of the same brand which is filled in in the engine. Add in the small portions, periodically checking level. The oils given about rough quantity, necessary for level finishing from the bottom mark to top, are given in the table.
6. After a dolivaniye densely wrap a stopper.
7. Transfusion is not allowed, otherwise the engine fails.

For engines 2E, 4E-FE and 7A-FE
1,2
For engines 4A-FE and 2С
1,0