Repair and Toyota Corolla car operation - 1.6.20. Check of an external condition of the battery//Toyota Corolla of 1992-1998 /

Toyota Corolla

1992-1998 of release

Repair and car operation



Toyota Corolla
- 1. Maintenance instruction
   1.2. Codes of models
   1.3. Control panel
   + 1.4. Combination of devices
   + 1.5. Governing bodies and instrumentations
   - 1.6. Start-up of the engine and driving
      1.6.1. Check before engine start-up
      1.6.2. Check after engine start-up
      1.6.3. Driving receptions
      + 1.6.4. Trailer towage
      1.6.5. Actions at refusal of start-up of the engine
      1.6.6. Obligatory set of tools and spare wheel
      1.6.7. Wheel replacement
      1.6.8. Car towage
      1.6.9. Motor compartment
      1.6.10. Arrangement of safety locks
      1.6.11. Check of level of oil in the engine
      1.6.12. Choice of brand of oil
      1.6.13. Check of level of cooling liquid
      1.6.14. Composition of cooling liquid
      1.6.15. Pressure check in tires
      1.6.16. Replacement of tires
      1.6.17. Shift of wheels
      1.6.18. Installation of winter tires and chains
      1.6.19. Precautionary measures for cast aluminum disks
      1.6.20. Check of an external condition of the battery
      1.6.21. Check of level of electrolit
      1.6.22. Battery charging
      1.6.23. Check and replacement of safety locks
      + 1.6.24. Replacement of lamps
   1.7. Specifications
   1.8. Adjusting data, refueling capacities and liquids
   + 1.9. Possible malfunctions
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment



1.6.20. Check of an external condition of the battery

GENERAL INFORMATION

1. Fastening bracket

2. A soyedinayeniye cable with weight

3. Poles


Check corrosion existence on terminal connections, cracks or weakening of fastening.

PERFORMANCE ORDER
1. At detection of corrosion wash out the struck place water solution of baking soda. Grease plugs with konsistentny greasing to prevent further corrosion.
2. Tighten nuts of plugs, the excessive inhaling is not allowed.
3. Tighten a bracket of fastening of the battery, the excessive inhaling is not allowed in order to avoid damage of the case of the battery.

Prevention

Before service of the battery stop the engine and disconnect all electrodevices.

At check disconnect the battery from "weight" first of all, and connect to "weight" in the last turn.

Be careful of short circuit of the battery by the tool.

Exclude hit in the solution battery for washing.