1992-1998 of release
Repair and car operation
- 1. Maintenance instruction
1.2. Codes of models
1.3. Control panel
+ 1.4. Combination of devices
+ 1.5. Governing bodies and instrumentations
- 1.6. Start-up of the engine and driving
1.6.1. Check before engine start-up
1.6.2. Check after engine start-up
1.6.3. Driving receptions
+ 1.6.4. Trailer towage
1.6.5. Actions at refusal of start-up of the engine
1.6.6. Obligatory set of tools and spare wheel
1.6.7. Wheel replacement
1.6.8. Car towage
1.6.9. Motor compartment
1.6.10. Arrangement of safety locks
1.6.11. Check of level of oil in the engine
1.6.12. Choice of brand of oil
1.6.13. Check of level of cooling liquid
1.6.14. Composition of cooling liquid
1.6.15. Pressure check in tires
1.6.16. Replacement of tires
1.6.17. Shift of wheels
1.6.18. Installation of winter tires and chains
1.6.19. Precautionary measures for cast aluminum disks
1.6.20. Check of an external condition of the battery
1.6.21. Check of level of electrolit
1.6.22. Battery charging
1.6.23. Check and replacement of safety locks
+ 1.6.24. Replacement of lamps
1.8. Adjusting data, refueling capacities and liquids
+ 1.9. Possible malfunctions
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment
Nuts of wheels. Be convinced available all nuts, reliability of their inhaling.
Existence of podtekaniye. After long parking check existence of podtekaniye of oil, fuel, liquids (emergence of drops of moisture after using the conditioner is allowed).
Light devices. Be convinced of serviceability of headlights, indexes of turn and other devices. Check correctness of adjustment of headlights.
Check pressure in a spare wheel, be convinced available a jack and a key for nuts of wheels.
Check a condition of seat belts, durability of fastening of buckles.
Be convinced of serviceability of all light indexes signaling about malfunction of various systems, illuminations of a scale of devices and a glass heater.
Check adjustment of a pedal of a brake.
Check existence of spare safety locks. The safety locks calculated on all currents which values are specified on a cover of the assembly block should enter into a set.
Check in a motor compartment
Check level of cooling liquid (see subsection 2.3).
Check electrolit level in battery sections.
Check a condition of the case of the battery and power cables, reliability of fastening of cables.
Check a conducting condition.
Check a condition of fuel hoses and tubes.