Toyota Corolla

1992-1998 of release

Repair and car operation



Toyota Corolla
- 1. Maintenance instruction
   1.2. Codes of models
   1.3. Control panel
   + 1.4. Combination of devices
   + 1.5. Governing bodies and instrumentations
   - 1.6. Start-up of the engine and driving
      1.6.1. Check before engine start-up
      1.6.2. Check after engine start-up
      1.6.3. Driving receptions
      - 1.6.4. Trailer towage
         1.6.4.1. Installation of the hook-on device
      1.6.5. Actions at refusal of start-up of the engine
      1.6.6. Obligatory set of tools and spare wheel
      1.6.7. Wheel replacement
      1.6.8. Car towage
      1.6.9. Motor compartment
      1.6.10. Arrangement of safety locks
      1.6.11. Check of level of oil in the engine
      1.6.12. Choice of brand of oil
      1.6.13. Check of level of cooling liquid
      1.6.14. Composition of cooling liquid
      1.6.15. Pressure check in tires
      1.6.16. Replacement of tires
      1.6.17. Shift of wheels
      1.6.18. Installation of winter tires and chains
      1.6.19. Precautionary measures for cast aluminum disks
      1.6.20. Check of an external condition of the battery
      1.6.21. Check of level of electrolit
      1.6.22. Battery charging
      1.6.23. Check and replacement of safety locks
      + 1.6.24. Replacement of lamps
   1.7. Specifications
   1.8. Adjusting data, refueling capacities and liquids
   + 1.9. Possible malfunctions
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment



1.6.4. Trailer towage

GENERAL INFORMATION

Your car is intended for transportation of passengers. Towing of the trailer worsens driving, dynamics of maneuver, raises a brake way, reduces profitability. It is forbidden to overload the car and the trailer. Manufacturer's guarantees do not extend on damages and malfunctions which are caused by trailer towing for the purpose of transportation of big consignments.

Standards

Before towage of the trailer be convinced that full mass of the car with the trailer, a maximum load on an axis and load of the coupling device do not exceed norm (see subsection 1.7)

Observe the following rules:

 – the full mass of the trailer with cargo does not exceed maximum permissible;
 – cargo in the trailer should be distributed so that load of the coupling device was not lower than 25 kgfs, but also did not exceed norm;
 – load of a back axis at connection of the car with the trailer should not exceed maximum permissible load of this axis more than for 15 %;
 – maximum permissible load of a back axis is specified in the plate of the manufacturer with car data.

The plate with car data

1. Full mass of the car

2. Maximum permissible load of a back axis