Toyota Corolla

1992-1998 of release

Repair and car operation


Toyota Corolla
- 1. Maintenance instruction
   1.2. Codes of models
   1.3. Control panel
   + 1.4. Combination of devices
   + 1.5. Governing bodies and instrumentations
   - 1.6. Start-up of the engine and driving
      1.6.1. Check before engine start-up
      1.6.2. Check after engine start-up
      1.6.3. Driving receptions
      - 1.6.4. Trailer towage
         1.6.4.1. Installation of the hook-on device
      1.6.5. Actions at refusal of start-up of the engine
      1.6.6. Obligatory set of tools and spare wheel
      1.6.7. Wheel replacement
      1.6.8. Car towage
      1.6.9. Motor compartment
      1.6.10. Arrangement of safety locks
      1.6.11. Check of level of oil in the engine
      1.6.12. Choice of brand of oil
      1.6.13. Check of level of cooling liquid
      1.6.14. Composition of cooling liquid
      1.6.15. Pressure check in tires
      1.6.16. Replacement of tires
      1.6.17. Shift of wheels
      1.6.18. Installation of winter tires and chains
      1.6.19. Precautionary measures for cast aluminum disks
      1.6.20. Check of an external condition of the battery
      1.6.21. Check of level of electrolit
      1.6.22. Battery charging
      1.6.23. Check and replacement of safety locks
      + 1.6.24. Replacement of lamps
   1.7. Specifications
   1.8. Adjusting data, refueling capacities and liquids
   + 1.9. Possible malfunctions
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment



1.6.4.1. Installation of the hook-on device
GENERAL INFORMATION

The manufacturer recommends to use the coupling device (an arm and a spherical support) Toyota firms.

Installation sites of an arm and spherical support of the coupling device are given in tables, the sizes are specified in mm.

Sedan
A
804
J
415
B
878
K
452
C
919
L
465
D
936
M
474
E
1067
N
778
F
747
O
829
G
814
P
838
H
397
Q
1066
I
400

Hatchback
A
804
K
414
B
881
L
414
C
893
M
421
D
927
N
447
E
970
O
471
F
1067
P
472
G
551
Q
636
H
633
R
666
I
636
S
675
J
407
T
889

Versatile person
A
804
J
464*1 441*2
B
844
K
477*1 464*2
C
919
L
743
D
936
M
774
E
1067
N
810
F
409*1 936*2
O
826
G
412*1 399*2
P
829
H
427*1 414*2
Q
1050
I
454*1 441*2

* 1 for cars with a wheel formula 4х4.
* 2 for other cars.

Tires

Check pressure in car tires (see subsection 2.4).

Pressure in tires of the trailer should correspond specified in the instruction of the manufacturer of the trailer for this full weight of the trailer.

Light alarm system

At each connection of the trailer check serviceability of stoplights and turn indexes. Direct merging of conducting can lead to failure of electric equipment of the car and to failure of the light alarm system.

Towing in a running in

The manufacturer does not recommend to tow the trailer the car with new the engine and units and details of transmission and a running gear (a box, differential, bearings of wheels, etc.) throughout the first 800 km of run.

Maintenance

Because of additional loading when towing trailer the car demands more frequent leaving and maintenance.

Check an inhaling of bolts of fastening of an arm and a spherical support of cцепного of the device through each 1000 km of towing.

Security measures

Observe cargo standards (cм. subsection 1.6.4).

Be convinced of reliability of fastening of the placed cargo.

At insufficient visibility going behind transport establish additional rear-view mirrors. The provision of both additional mirrors should be regulated to provide the sufficient review behind.