Toyota Corolla
- 1. Maintenance instruction
1.2. Codes of models
1.3. Control panel
+ 1.4. Combination of devices
+ 1.5. Governing bodies and instrumentations
- 1.6. Start-up of the engine and driving
1.6.1. Check before engine start-up
1.6.2. Check after engine start-up
1.6.3. Driving receptions
+ 1.6.4. Trailer towage
1.6.5. Actions at refusal of start-up of the engine
1.6.6. Obligatory set of tools and spare wheel
1.6.7. Wheel replacement
1.6.8. Car towage
1.6.9. Motor compartment
1.6.10. Arrangement of safety locks
1.6.11. Check of level of oil in the engine
1.6.12. Choice of brand of oil
1.6.13. Check of level of cooling liquid
1.6.14. Composition of cooling liquid
1.6.15. Pressure check in tires
1.6.16. Replacement of tires
1.6.17. Shift of wheels
1.6.18. Installation of winter tires and chains
1.6.19. Precautionary measures for cast aluminum disks
1.6.20. Check of an external condition of the battery
1.6.21. Check of level of electrolit
1.6.22. Battery charging
1.6.23. Check and replacement of safety locks
+ 1.6.24. Replacement of lamps
1.7. Specifications
1.8. Adjusting data, refueling capacities and liquids
+ 1.9. Possible malfunctions
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment
|
The elementary checks
Before checks be convinced that you in accuracy executed the actions described in subsection 1.6, and that the car is filled with fuel enough. If the car is equipped with system of coding of start of the engine (immobilizer), start the engine other keys from a set. If the engine is started, the reason is ignition key breakage. Check a key in car-care center service. If by means of other keys to start the engine it is not possible, address in car-care center service as refusal of anticreeping system is possible.
| PERFORMANCE ORDER |
| 1. If the starter does not rotate the engine or rotates poorly, check a condition of plugs of power cables, reliability of their fastening. |
| 2. If a condition of plugs satisfactory, include internal lighting. If lamps do not burn or become dim (or die away) at starter inclusion, the battery is discharged. In this case start the engine from the additional battery or if the car is equipped with mechanical KP and there is no catalytic converter, the engine is allowed to be started car pushing. To start the diesel engine pushing at strongly discharged battery, as a rule, it is not possible. |
| 3. If lamps do not die away, and the engine is not started, adjustment of the engine or repair is necessary. In this case address in car-care center service for the qualified help. |
Prevention
Prevention. It is forbidden to start the engine towage. Otherwise after start of the engine possibly collision. Engines of models 4E-FE, 4A-FE, 7A-FE also cannot be started pushing. Converter can be heated and become a cause of the fire.
|
| 4. If the starter rotates the engine with normal speed, but the engine is not started, execute the following actions. |
| Petrol engines |
| 5. Be convinced of reliability of fastening of all demountable connections of conducting (especially sockets on the distributor and fastenings of wires to spark plugs). |
| 6. If connections in a satisfactory condition, a cause of failure at start-up is reenrichment of a mix and filling of cylinders with gasoline (see below). |
| Diesel engines |
| 7. If you tried to start the engine at an empty tank, it is required to remove air from fuel system (see below). |
| 8. If air is removed, but the engine not for is started up, repair is necessary. In this case address in car-care center service for the qualified help. |
|
Engine start in case of overflow of cylinders by gasoline
In default at start-up cylinders of the engine can be overflowed with gasoline because of repetition of unsuccessful attempts of start-up.
| PERFORMANCE ORDER |
| On engines 4E-FE, 4A-FE, 7A-FE |
| 1. Turn the ignition key in the situation START and press a butterfly valve pedal. Hold a key and a pedal no more than 15 with then release. Then clean a foot from a pedal and repeat start. |
| On SE model engines |
| 2. Press a pedal of a butterfly valve and keep 15–20 villages. Then try to start the engine, without cleaning a foot from a pedal. It is not allowed to press a pedal, it should be held only at a floor. |
| 3. If the engine is not started after 15 from starter work, switch off a starter, wait some minutes then repeat attempt. |
| 4. In default start of engines of models 4E-FE, 4A-FE and 7A-FE repair or adjustment is required. |
| 5. In default start-up of the engine of type 2Е execute the procedure described above and test the following. |
| 6. Turn out candles and dry electrodes. |
| 7. Turn the ignition key in the situation START and press a butterfly valve pedal. Hold a key and a pedal no more than 15 with then release. |
| 8. Wrap spark plugs. |
| 9. Having cleaned a foot from a pedal, try to start the engine. If the engine is not started, adjustment or repair is necessary. |
|
Air removal from fuel system
|
|
If fuel is developed, after filling of the car refusal at engine start-up is possible. In this case pump up fuel the pump to feeling of resistance. |
Engine start-up in emergency conditions
In the absence of necessary experience we urgently recommend to address for the help to competent persons or in car-care center.
Study safety rules at the handling of the storage battery.
Prevention
Be convinced of that rated voltage of the starting battery of 12 Century.
Start order from the additional battery
1, 2, 3, 4. Order of connection of cables
And. Positive pole
Century. The discharged battery
Page. Starting cables
D. Positive pole
Е. Dopolnitelny battery |
F. Negative pole
G. On engines of model 2Е to earth for an assembly hook of the engine
N.Na engines of models 4E-FE, 4A-FE, 7A-FE and 2С to earth on this assembly hook of the engine |
| PERFORMANCE ORDER |
| 1. If the engine is started from the battery of other car, bodies of cars should not adjoin. Disconnect everything extraneous consumers (light devices and additional electric equipment). |
2. If necessary remove jams from sections of the additional and discharged batteries. Close openings rags (this measure is necessary to reduce danger of explosion and a personnel travmirovaniye).
3. Start the car engine with the additional battery, some minutes later finish turns to 2000 rpm. |
| 3. Connect starting cables in an order specified an illustrations, a positive pole of the discharged battery with a positive pole of the additional battery, a negative pole of the additional battery connect to the engine or with weight. |
| 4. At first attach a cable to a positive pole of the discharged battery, and then to a positive pole of the battery. |
| 5. Then connect a cable to a negative pole of the additional battery and with the unpainted strongly fixed site of weight, far from the digit battery (for example, for an assembly hook of the engine). It is not allowed to have starting cables near moving details. |
| 6. Only for diesel engines: charge the discharged battery from additional, supporting number of turns of the engine of the car with the additional battery at level of 2000 rpm within 5 minutes. |
| 7. Start your engine, operating regularly. After start-up finish number of turns to 2000 rpm. |
| 8. Carefully disconnect cables upside-down: at first negative, then positive. |
| 9. Utilize the rags covering batteries which can be soiled by electrolit. |
| 10. Wrap section jams (if turned away). |
| 11. If the reason of the category of the battery is unevident (for example if you do not remember, чтоы the car for a long time remained with the included headlights), check the battery. |
|
If the engine decayed during movement
| PERFORMANCE ORDER |
| 1. Smoothly to lower speed, without changing the movement direction. Carefully curtail on a roadside. |
| 2. Include a signal of an emergency stop. |
| 3. Try to start the engine. |
Prevention
On the idle engine because of inaction of the vacuum amplifier and the hydraulic booster it is necessary to put a little bigger effort to a pedal of a brake and to a wheel.
|
|
Actions at an engine overheat (petrol engines)
High temperature of cooling liquid, capacity loss by the engine or strong ringing knocks indicate an engine overheat. In this case an order action such is.
| PERFORMANCE ORDER |
| 1. Curtail on a roadside, stop and include signals of an emergency stop. Transfer the lever to situation. To R (on automatic transmission) or in neutral situation (on mechanical transmission), deliver the car on the hand brake. Switch off the conditioner (if it was included). |
| 2. If the radiator leaves steam or liquid pours out, stop the engine. After the steam-out will stop, open a cowl. If steam-out or liquid it is not observed, the engine do not stop, be convinced that the fan of system of cooling works. If the fan does not rotate, switch off ignition. |
| 3. Check survey integrity of a belt of a drive of the pump of cooling liquid. Check existence of leaks from a radiator, hoses and from below the engine. Keep in mind that if the conditioner was switched on, from units of the conditioner water running off is allowed. |
| 4. If the belt is torn or there is a leakage of liquid, immediately stop the engine and call in car-care center service. |
5. If the belt is whole and podtekaniye are not present, check availability of liquid in a broad tank. If the tank is empty, add liquid on the working engine. Fill a tank approximately to the middle.
Attention! It is not allowed to remove a stopper of a jellied mouth of a radiator on the hot engine. Otherwise it is possible to burn escaping under pressure steam or liquid. |
| 6. After liquid cooling to normal temperature again check level in a tank. If level strongly fell, in system of cooling there is a leak and the car is subject to immediate repair (address in car-care center). |
|
Actions at a wheel puncture
| PERFORMANCE ORDER |
| 1. Reduce smoothly speed, without changing the movement direction. Curtail on a roadside, stop on an equal platform with a firm covering. |
| 2. Stop the engine and include signals of an emergency stop. |
| 3. Transfer the lever to situation P (on automatic transmission) or include a backing (on mechanical transmission), put the car on the hand brake. |
| 4. Ask passengers to leave the car. |
Prevention
Act according to the instruction attached to a jack.
Jack to use only for car lifting at wheel change.
It is forbidden to climb under the car when it is lifted on a jack.
It is forbidden to start the engine when the car is lifted on a jack.
|
|
|
|