Toyota Corolla

1992-1998 of release

Repair and car operation



Toyota Corolla
- 1. Maintenance instruction
   1.2. Codes of models
   1.3. Control panel
   + 1.4. Combination of devices
   + 1.5. Governing bodies and instrumentations
   - 1.6. Start-up of the engine and driving
      1.6.1. Check before engine start-up
      1.6.2. Check after engine start-up
      1.6.3. Driving receptions
      + 1.6.4. Trailer towage
      1.6.5. Actions at refusal of start-up of the engine
      1.6.6. Obligatory set of tools and spare wheel
      1.6.7. Wheel replacement
      1.6.8. Car towage
      1.6.9. Motor compartment
      1.6.10. Arrangement of safety locks
      1.6.11. Check of level of oil in the engine
      1.6.12. Choice of brand of oil
      1.6.13. Check of level of cooling liquid
      1.6.14. Composition of cooling liquid
      1.6.15. Pressure check in tires
      1.6.16. Replacement of tires
      1.6.17. Shift of wheels
      1.6.18. Installation of winter tires and chains
      1.6.19. Precautionary measures for cast aluminum disks
      1.6.20. Check of an external condition of the battery
      1.6.21. Check of level of electrolit
      1.6.22. Battery charging
      1.6.23. Check and replacement of safety locks
      + 1.6.24. Replacement of lamps
   1.7. Specifications
   1.8. Adjusting data, refueling capacities and liquids
   + 1.9. Possible malfunctions
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of cooling, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment



1.6.14. Composition of cooling liquid

GENERAL INFORMATION

Water plums from the fuel filter

The arrow specified a drain stopper.

Into composition of cooling liquid enter antifreeze (этиленгликоль) and anticorrosive additives.

Liquid with anticorrosive additives can be applied only in those regions in which freezing is excluded.

As such additives Radiator Conditioner of Toyota firm or equivalent are recommended.

Properties of cold-resistant and anticorrosive additives and recommended proportions of water are specified on container by the manufacturer. The capacity of system of cooling is specified in subsection 1.8. Antifreeze is recommended to be mixed with water in the ratio 50:50 or in such ratio which provides a freezing point not above–35 °C.

It is forbidden to apply antifreeze on a spirit basis or to fill in in cooling system pure water.

Fire of a control lamp of the fuel filter specifies that from the filter it is necessary to merge water immediately.

PERFORMANCE ORDER
1. Substitute under a drain stopper the pallet.
2. Unscrew a stopper counter-clockwise, on 2–2,5 turns (at a bigger otvorachivaniye water will pour down on the stopper periphery).
3. Pump up the pump fuel to its effluence.
4. Tighten a stopper by hand (the tool not to use).